Good to see you!
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
Dulux Aquatech Max Waterproofing
-
Finish NA
-
Coverage 1.2-1.4 m²/kg
-
Drying Time Full painting system (Self priming + 2-3 coats, undiluted) DFT 600um
Self-Priming : 4-6 hours under normal conditions.
Recoat 2-3: 4-6 hours under normal conditions. -
Coats 3
-
Hydroresist Technology
-
Excellent Waterproofing
-
Advanced Crack Guard
-
Foot Trafficable
Product Description
elastomeric roof coating that is made with fine pigments and extremely durable high bond polymer. Its breakthrough Hydroresist technology forms an impenetrable tough yet flexible barrier film over porous surfaces to bridge cracks and to prevent water seepage and fungal attacks.It is suitable to be used for areas that require special waterproofing like roofs, balconies, RC gutters and planter boxes, floor slabs, decks, external walls and interior floors under tile.
Application Description
Allow to dry 4-6 hours. Followed by 2-3 coat of undiluted paint by roller at
perpendicular direction, with overcoating time of 4-6 hours. Leave to dry for a minimum
24 hours depend on the temperature & humidity.
For areas that require strengthening, use a polyester mesh on the first layer while it is still wet.
Notes: Do not apply during rain or in wet conditions to obtain best waterproofing and
finishing. Not recommended for constant immersion in water.
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesThe surface must be clean, dry and sound. Remove any old paint, dirt, plaster, fungus
and algae by using appropriate method. Apply Dulux Fungicidal Wash to treat the surface affected by algae/fungal. Use a mixture of sand and cement to patch larger holes or defected on the horizontal surface. The surface should be able to drain off water or have a slope of 1-2% to allow water run-off.
For new surface, allow the surface dry well (Moisture reading on a Protimeter should be <16% and surface temperature not over 40°C)
For chalky surface, remove as much of the powdery chalk before applying. -
2. CleaningClean all equipment with clean water immediately after used.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Dulux Aquatech Max Waterproofing
Save job