Dulux Inspire Gloss

Good Gloss Retention and Smooth Finish
Smoky White 70BB 64/035
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Gloss
  • Coverage 16 m2/L.
  • Drying Time Single coat at standard thickness:
    Touch Dry: 2-4 hours.
    Recoat: 6-8 hours.
  • Coats 2
Product Features
  • suitable for use on wood and metal surfaces
  • Great gloss retention & firm clarity
  • Meets Malaysian Standards MS125-1995

Product Description

Dulux Inspire Gloss comes with the Chroma Brite Technology that makes the surfaces stay bright in colour and smooth finish. It also provides good gloss retention.

Health & Safety

Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin.Contains: ETHYL METHYL KETOXIME, COBALT CARBOXYLATE. May produce an allergic reaction. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 – never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.

Tips & Advice

  • 1. Preparing the Surfaces
    Surfaces generally must be clean, dry, free from all defective or poorly
    adhering material, dirt, grease, wax etc. Previously painted surfaces
    should be thoroughly rubbed down using a suitable abrasive paper or wirebrushed
    to remove millscales and rust, and then dusted off.
    Steel surfaces should be manually prepared by power or hand tool to BS
    7079 Part A1 : St3. For optimum performance new galvanized and
    aluminium surfaces should be cleaned and degreased, then pre-treated
    with an appropriate pre-treatment primer to ensure good adhesion.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner 850-41 or white spirit immediately after use.
  • 3. Storing
    Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.
Fetching the data, please wait...