Good to see you!
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
Dulux PureAir
-
Finish Low Sheen
-
Coverage 12m²/L
-
Drying Time Single coat at standard thickness:
Dependant on temperature and humidity.
1-2 hours. -
Coats 2
-
Neutralises formaldehyde
-
Complies with JC/T 1074-2008 "Purificatory performance test method of coatings on air purification"
-
Low VOC, low odour
-
Anti-Bacteria
-
Mould & Fungus resistant
-
Low sheen finish
Product Description
Application Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesSurfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. It is important to ensure that your wall is smooth and even to obtain the best results from Dulux Pure.Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.
-
2. CleaningClean all equipment with clean water immediately after use.
-
3. StoringKeep away from food, drinks and animal feed. Store in a cool and shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Dulux PureAir
Save job