DULUX WOODCARE TIMBERTONE

Interior wood paints
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish NA
  • Coverage 15 m²/L
  • Drying Time Drying time : 4-6 hours under normal conditions
    Recoat 2 : 6-8 hours under normal conditions
  • Coats 3
Product Features
  • Great resistance to scratches and stains
  • Great gloss retention & firm clarity
  • Translucent finish that highlights wood grains

Product Description

Dulux Woodcare Timbertone® is a durable polyurethane- reinforced varnish for the protection and decoration of all wood surfaces including parquet floors, paneling, wooden doors and furniture. It offers good resistance to scratches and stains. The finish is designed to bring out the beauty of wood through highlighting the wood grains and good film clarity.
Dulux Woodcare Timbertone® is available in Clear Glossy, Clear Satin
and a selection of Glossy Transparent natural colours.

Application Description

SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free from any defects or poorly adhering material, dirt, grease or wax, etc.
REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
NOTE: Always keep doors and windows fully open during application and drying.

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear eye/hand protection. Do not eat, drink or smoke when using this product. Remove as much paints as possible from brushes and rollers before cleaning. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Do not empty into water course. Safety data sheet available for professional user on request. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher - Never use water jet. If medical advice is needed, have product container or label at hand.

Tips & Advice

  • 1. Preparing the Surfaces
    SURFACE PREPARATION: Make sure that the surface to be painted is clean, dry, free from any defects or poorly adhering material, dirt, grease or wax, etc.
    REMOVE RESIDUE: All surfaces should be rubbed down with suitable abrasive paper in the direction of the wood grain and dusted off.
    NOTE: Always keep doors and windows fully open during application and drying.
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use. In the event of an accident, contain and collect spillage using sand or earth.
  • 3. Storing
    Keep out of reach of children. Keep away from combustible material. Keep away from food, drinks and animal feed. Container must be in a secure, upright position and be tightly closed.
Fetching the data, please wait...