For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Sheen Finish
Coverage
11-12m²/L
Drying Time
Single coat at standard thickness: Touch Dry: Dependent on temperature and humidity. Recoat: 1-2 hours.
Coats
2
Product Features
Washability
Anti-virus
Anti-Bacteria
Sheen finish emulsion for interior walls
Colourguard™ Technology
Water Based
Low VOC, low odour
Product Description
Dulux EasyClean Plus is a premium quality sheen finish interior paint with KidProof+ Technology that delays stains from penetrating further into the paint film and can be wiped away easily. With its anti-bacterial property, it also aids to inhibit growth of bacteria on walls. Now with Silver Ion Technology, it comes with an added benefit of anti-virus property that helps to effectively work against certain virus (^). Disclaimer: (^) Under test conditions. All the claims mentioned are subject to compliance with conditions maintained in Product data sheet.
Application Description
Roller or brush
Health & Safety
Keep out of the reach of children.
Do not breathe vapour/ spray.
Use only in well ventilated areas
Safety data sheet available for professional user on request.
Avoid contact with skin or eyes
If swallowed seek medical advice immediately and show this container or label.
Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used
Do not use empty container for storing food.
Remove as much paints as possible from brushes and rollers before cleaning.
Keep away from food, drinks and animal feed.
Store in a cool and shaded place.
Container must be in a secure, upright position and be tightly closed.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners.
Wear eye/hand protection.
Avoid release to environment. Refer to special instructions/Safety data sheet.
Do not empty into water course.
Dispose of used container in compliance with local regulation.
Refer to Dulux Product Safety Data Sheet for further details.
Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax and be thoroughly rubbed down using a suitable abrasive paper and dusted off. Treat areas affected by mould, fungi or algae with Dulux Fungicidal Wash (A980-19260). If after thorough preparation, surfaces remain powdery, seal with one coat of an appropriate Primer (see TDS). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 16%. These wall should be left to dry further.
2.
Cleaning
Clean all equipment with clean water immediately after use.
3.
Storing
Keep away from food, drinks and animal feed. Store in a cool and shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
